Installation manual SR85/CF COVER FEEDER
NOTE: Make sure you routed the PSH correctly, so it won’t be in the way when you are
installing the Cover Feeder on top of the Top cover.
8.
Put the cover Feeder on the top cover. Make sure that the lower paper path on
the Cover Feeder goes down in the manual feed gap, check that all four rubber
pads have contact with the Top cover of the Booklet maker.
9.
Lift the Cover Feeder on the front side, and install the Front Installation
Bracket in the Cutout on the Cover Feeder frame, according to figure 4.
Figure 4, view of lifting the
Cover Feeder and installing
the Front Installation Bracket.
Figure 5, view of the
installation of the Front
Installation Bracket.
10. Loosen the nut on the front Installation Bracket, so you can secure the Cover
Feeder, according to figure 5.
11. Finger tighten the screw.
12. Lift the Cover Feeder on the rear side, and install the Rear Installation
Bracket in the Cutout on the Cover Feeder frame.
13. Loosen the nut on the rear Installation Bracket, so you can secure the Cover
Feeder.
14. Finger tighten the screw.
1-11
