Section 1. Getting Started
PlexWriter 8/4/32 Operation Manual
5
Rear Panel
Figure 2: Rear Panel of the PlexWriter 8/4/32 Internal Drive
•
Audio output connector
: Outputs stereo analog signal. Use to connect to
soundboard or audio amplifier. Use standard MPC-3 type, 4-pin connector.
•
Jumpers
: Use to select operation as an IDE master or slave, or for cable select.
In general, leave these jumpers at their factory settings.
•
IDE interface connector
: Connects to IDE interface using 40-pin IDE flat
ribbon cable.
•
Power connector
: Connects to your computer’s power supply to provide
DC +5V and +12V to the PlexWriter.
About Mastering Software
In order to create CD-R and CD-RW discs you will need to have mastering software
installed on your computer system. You can check our web site (www.plextor.com)
for an updated list of software that supports your drive. We provide mastering
software kits in retail packaging for your convenience.
