Section 1. Getting Started
PlexWriter 8/4/32 Operation Manual
3
What's in the Box
What you find in your Plextor box
depends on what the company that
sold you the box put in—or took
out—while the Plextor drive was in
their possession.
Plextor currently sells its PlexWriter
8/4/32 drive in this configuration:
•
PlexWriter 8/4/32 CD-RW drive
•
40-pin IDE ribbon cable
•
4 mounting screws
•
1 piece of approved CD-RW
media
•
1 piece of approved CD-R media
•
Plextor CD with bundled pre-
mastering and packet writing
software, including
PlextorManager 2000
•
PlexWriter 8/4/32 operation
manual
•
Warranty registration card
•
PlextorManager 2000 manual
If the security sticker on top of your
box is cut, there may be a good
reason: for example, a dealer may
have added other components or
software. Carefully check the
contents to ensure nothing has been
removed. If something is missing,
contact the party from whom you
purchased the box for an explanation.
If your drive came pre-installed, some
or all of the items above may have
been installed and may not be
separately available.
See Appendix C for locations to
purchase additional or replacement
accessories.
Save Your Box!
Be sure to save the box after you have
installed your PlexWriter drive. The
box and its packaging material were
designed and drop tested to ensure your
PlexWriter can endure rough treatment
and still arrive in working order.
Please save the tray insert that was used
to protect the delicate internal
components during shipping. Should
you need to ship the PlexWriter, it
should be placed on the tray inside the
drive.
We hope you will never have to ship
your drive back to us. If you do,
however, it's best to send it packaged in
the original box. Some of our customers
have not held on to their boxes and have
had to resort to less-than-secure
methods to get drives back to us.
We cannot assume liability for any
damage your drive sustains during
shipment. Therefore, please ship your
drive in the safest manner possible.
Before shipping your drive, refer to the
Plextor web site for pointers. The web
site is at:
http://www.plextor.com
If you did not receive a box (for
example, your drive came pre-installed
in a computer), we recommend you pay
a packaging store (such as Mail Boxes
Etc.) to ship your drive. If you don’t
have a packaging store in your area, ask
our Technical Support Department for
packaging pointers when you call to get
an RMA number before returning any
drive.