pleasant hearth VFL-CO18DT, Руководство пользователя

Страница: 21 / 33

20
INSTALLATION
In compliance with ANSI Z21.60•CGA2.26 and National Fuel Gas Code, Section 6.
BEFORE INSTALLING THE APPLIANCE
- Turn off gas supply to fireplace or firebox.
- Clean fireplace floor and chimney before installing log set. Seal any ash. Clean out doors to protect
the unit from down drafts.
MOUNTING PROCEDURE
- Place grate/burner assembly into firebox with the front pan facing forward.
- Drill two (2) 5/32" diameter holes approximately 1" deep.
- Anchor the front pan to the floor using the (2) Concrete Attachment Screws (Not Included)
(See Fig. 11.1).
- Proper installation of the grate is essential to prevent any movement of the gas logs and
controls during operation.
Fig. 11.1
3/4 Hex Head Flanged
Concrete Screw (Not Supplied)
Mark Location using Log Set
and Drill Hole in Floor of
Fireplace approx. 1" deep
to Accept Concrete Screw.
(Both Sides)