Playcraft Farm Sound Panel Insert R5, Руководство по установке

Страница: 164 / 314

IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
RAMP R5
INSTALLATION INSTRUCTIONS
Rev H
2/22/2022
R5-1208
Page 1 of 7
FIGURE 1
Ramp R5
See Footing Detail
See Installation Manual
Sections R5-09 Collars
Figure 1.2
Figure 1.3
Figure 1.5
Figure 1.1
NOTE : Ramp w/ Rails shown R5.
Other configurations will vary slightly,
but does not affect assembly.
Figure 1.4
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual for R5-09 Collars assembly instructions.
(D) An appropriate energy absorbing safety surface is required under and around all playground equipment. Loose
fill protective surfacing is shown only as an example for the purpose of this assembly instruction. Other surfacing
material may vary in thickness and/or compression depths. See free publication - The Handbook for Public
Playground Safety, Publication #325 at www.cpsc.gov for the surfacing appropriate for the fall height of the
equipment or consult your surfacing supply representative.
(E) The Gap Between the Top of the Ramp and the Bottom of the Wall should be no more than 1". Please refer to
the Footing Detail View.