Plasmon LF 6602, Руководство пользователя

Страница: 21 / 103

97654438 E
Page 21
UNPACKING AND REPACKING
INSTRUCTIONS
If the Laser Drive’s shipping carton shows evidence of rough handling or damage, return the unit in it’s
carton to your supplier and request a replacement.
UNPACKING THE LF 6602
The LF 6602 is shipped with foam packing material which protects the unit from shock and vibration. After
you receive your LF 6602, inspect the shipping carton for damage before unpacking the unit to
substantiate a claim with the carrier if the unit is damaged. Retain all original packing materials for possible
reshipment.
WARNING
Physical injury will result if you attempt to lift the LF 6602 without
using proper equipment.
When the LF 6602 is being unpacked or transported, ensure that the
unit is tilted no more than 10 degrees from the vertical position. The
LF 6602 weighs more than 181 kg (400 lbs). If the unit is tilted more
than 10 degrees, it can topple over, causing personal injury.
To unpack the LF 6602, you will need the following tools:
•
diagonal cutters
•
One T-15 screwdriver
•
One #2 cross recess screwdriver
•
One 1/2-in. socket wrench
To unpack the LF 6602, perform the following procedure:
1) Cut the banding straps and remove the plastic corners.
2) Lift the shipping carton up, off the LF 6602, and remove the ramp and the foam cushion.
3) Remove the protective bag from the unit and then remove all adhesive tape from the unit's
exterior, such as on the key lock on the rear of the cabinet.