Planmeca PlanMill 60 S, Руководство пользователя

Страница: 26 / 114

• Users are informed of noise risks and protective measures
• Suitable hearing protection is available if the daily noise exposure level
exceeds 85 dB(A)
• Sufficiently trained personnel are available if necessary, in order to
reduce the duration of exposure
• Warning signs are visibly displayed where this is necessary!
7.7 Freeing a trapped person
Freeing a person trapped in the milling unit’s interior, for example due to
trapping or catching on a drive axis, takes place after pressing the milling
unit's on/off switch at the back of the unit in order to shut down the milling
unit as quickly as possible and to analyse the hazardous situation!
Proceed as follows to release the trapped person:
•
Assess the condition of the trapped person and inform emergency
services if necessary!
• Due to the low mass of the drives, it is possible to move the axes
manually when de-energised!
7.8 Fire protection
When processing flammable materials, the milling unit user must perform
a risk assessment of the workstation, because he selects the materials
and tools (see also industrial health and safety regulation). The fire
hazards must be assessed, taking into account the materials and tools,
and, if applicable, suitable measures to reduce them (e.g. extinguishing
equipment, temperature monitoring, monitored operation by employees)
must be defined.
Always also observe the safety information and data sheets from the
coolant lubricant and materials manufacturers. In accordance with the
organisational fire protection, suitable extinguisher equipment (fire blankets
and fire extinguishers of class A, B, C, D) must be made available as
is expedient and in sufficient quantities. When selecting the extinguisher
equipment, it is essential to observe the limitations of use and the distance
information.
7.9 In case of fire
In case of fire, only extinguish this at the milling unit with a CO2
fire extinguisher (carbon dioxide extinguisher). The use of extinguishers
containing water must be avoided with electrical systems for safety reasons!
In case of fire:
•
Press the stop button on the milling unit front
• Disconnect the power supply (fuse box)
• Notify the fire brigade
• Extinguish milling unit fire with CO2 fire extinguishers
7 For your safety
20 Planmeca PlanMill 60 S User's manual