Planmeca PlanMill 60 S, Руководство пользователя

Страница: 25 / 114

• Storage and disposal of health-endangering or flammable dust takes
place correctly
• Dust is not inhaled and suitable personal protective equipment is made
available if necessary
• Eating, drinking and smoking are strictly prohibited in areas where
health-endangering dust may arise!
• Warning signs are visibly displayed in areas where this is necessary!
• Operation and maintenance instructions for the extraction system are
strictly observed!
Vapours
When working with certain materials, vapours (gases, aerosols) may arise.
These may be harmful to health or flammable, and the user must therefore
ensure that:
•
Users receive regular safety training
• Users are sufficiently sensitised in this regard (information security)
• User instructions and safety data sheets of the various substances are
available to the users and provide information on the dangers (user’s
manual)!
• Vapours are not inhaled and suitable personal protective equipment is
made available if necessary
• Eating, drinking and smoking are strictly prohibited (ban on flames and
fire) in areas where healthendangering gas and vapours may arise!
• Warning signs are visibly displayed in areas where this is necessary!
Gases
When working with certain materials, fine milling dust may result. In addition,
the ionizer creates ozone. Gases like ozone may be hazardous to health,
and the user must therefore ensure that:
•
The limit value for ozone is complied with. If in doubt, test measurements
must be carried out.
• Good ventilation of the machine's installation site is guaranteed.
• Users are informed about the health risks of increased ozone
concentrations and possible protective measures.
• Users with pre-existing conditions (respiratory diseases) receive
occupational medical consultations and examinations. Additional
protective measures may be necessary.
• Users receive regular safety training.
• Users are sufficiently sensitised in this regard (information security).
• A risk assessment of the workstation is carried out.
• Operation and maintenance instructions for the extraction system are
strictly observed!
7.6.5 Noise / sound emissions
The milling unit’s emissions sound pressure level is lower than or equal to 85
dB(A) when using the approved materials and tools. However noise peaks
may arise with certain processing combinations, and the user must therefore
ensure that:
7 For your safety
User's manual Planmeca PlanMill 60 S 19