Planmeca Compact i Touch v2 Скачать руководство пользователя страница 142

Страница: 142 / 314

NOTE

Only one instrument at a time can be in the queue. If two or three

instruments are picked up while driving an instrument, only the

instrument that was picked up last will remain in the queue.

3. The dentist returns the active instrument (instrument 1) to the instrument

console and immediately the instrument in the queue (instrument 2) is

activated and handed to the dentist by the assistant. Instrument 2 can be

driven with the foot control as described above.

23.2 Micromotor

23.2.1 Speed/power

Standard pedal: To drive the instrument, push the foot control pedal to the

right or to the left.
Wide pedal: To drive the instrument, push the foot control pedal down.

Pushing the pedal further to the right/left or down will increase the speed or

power of the instrument. As you push the pedal, the power output is

displayed on the control panel.
The normal range is 10 - 100%.
To stop the instrument, allow the pedal to return to the rest position.

CAUTION

Ensure that the pedal is in rest position when you activate the instrument.

NOTE

The speed/power level depends on the instrument.

23 Operating instruments

132 Planmeca Compact i

User's manual

Содержание Compact i Touch v2



























































































































































































































































































































Результаты поиска

Содержание Compact i Touch v2

Отзывы:

Planmeca Compact i Touch v2, Руководство пользователя, Страница: 142 / 314

Результаты поиска

Содержание Compact i Touch v2

Отзывы: