background image

Copyright Planika Sp. z o.o.  

www.planikafires.com 

 

 

 

 

 

 

C.

 

Flame size regulation 

The PrimeFire can operate in two modes: Normal and ECO. The device always starts with a standard flame size. The 

device has the adjustable flame size during operation.  

In order to reduce the height of the flame, press the ECO button. You will hear two beeps and the ECO button will be 

highlighted. The unit is now operating in ECO mode. 

To  return  to  the  normal  height  of  the  flame,  press  the  ECO  button,  you  will  hear  one  beep  and  the  ECO  button 

backlight turns off. The device is now in normal mode. 

ATTENTION!

 It might take a few moments for the flame to adjust. 

ATTENTION!

 The device switches to ECO mode by itself when there is a danger of over-temperature of the device. 

D.

 

Device extinguishing 

Press the 

START/STOP

 button on the control panel. You will hear two beeps and the red indicator will start to blink 

The blinking red indicator means that the device is too hot to be restarted. When the device cools the message will 
disappear, and depending on the amount of the fuel in the tank, either the green indicator will flash and indicate the 
readiness for operation or the blue indicator will indicate the lack of the fuel. 

E.

 

Subsequent start up 

If on the control panel flashes the blue FUEL indicator, start to run the product from the point B.2. 

If on the control panel flashes the green READY indicator, you can: 

 

start to run the product from the point B.3. 

 

open the fuel filler bolt -  the green READY indicator will go off. If: 

- the blue indicator blinks and a beep sounds intermittently - the tank is full and it is not allowed to pour any 
more fuel! Close the fuel filler bolt and proceed in accordance with section B.3. 

- the blue indicators flashes - you can refuel (see section B.2) and turn on the device (see section B.3) or close 
the fuel filler bolt and activate the device by following the point B.3. 

F.

 

Information and warning alert 

In order to increase safety, the PrimeFire is equipped with an electronic system to keep the operation safe. In the case 
of a dangerous situation, the device immediately triggers alarms. 

 
LEGEND: 

HOT

HOT

HOT

HOT

The indicator is off 

The indicator flashes 

The indicator is blinking 

Содержание PrimeFire 2










Отзывы: