Copyright Planika Sp. z o.o.
www.planikafires.com
9
V.
Cleaning and maintenance
Switch off the device before cleaning. Wait until the temperature of the device gets close to the ambient temperature.
To maintain appropriate technical condition of the device, please observe the following rules:
•
Lacquer coating the furnace is not resistant to abrasion. It is not recommended to
wipe the surface.
•
Clean the furnace with a soft cloth and water to avoid causing cracks and scratches
When purchasing and dozing cleaners, be sure to protect the environment and comply with the recommendations of
manufacturers.
It is forbidden to clean the inside of the device by unauthorized persons.
The manufacturer does not foresee a situation where it will be necessary to clean elements not normally available.
The manufacturer is not liable for damage resulting from:
improper operation (non-manual)
self-dismantling
attempts to modify
using other liquids than those recommended in point II. Fuel
.
VI.
Disposal and recycling
The product is equipped with parts made of aluminium, steel, plastics and electronics. If you need to dispose of the
device, follow the terms of disposal and recycling in force in your country.
Moreover, dispose of the empty Fanola containers should be dumped to plastic waste baskets.
Most of the materials used in Planika appliances can be recycled.
-------------------------------------------------------------------------------------------------------------------------------------
If you have any technical problems or other questions that need clarification, contact your dealer.
