Copyright Planika Sp. z o.o.
www.planikafires.com
4
•
It is recommended to regularly check the safety tray for presence of fuel. If there is fuel in the safety tray it
needs to by dried.
•
The device is not fit for constant operation.
•
It is not permitted to use other liquids than the recommended FANOLA®.
•
Do not expose the device to weather conditions. The product is for internal use only.
•
Please read the device installation manual to avoid placing the device in rooms with a capacity of less than
required.
•
While working, the device emits heat, water vapour and carbon dioxide, therefore it is necessary to provide
proper ventilation of the interior, so that the total air exchange is 1/h.
•
During the device’s starting sequence the characteristic smell of the liquid used in the device or the
recommended FANOLA® liquid.
•
Do not install the device in areas of large drafts of air, near fans, vents, etc.
•
Do not place in areas where there might be a potentially explosive atmosphere of paint vapours, industrial
dusts, etc.
•
Do not use the device at the ambient temperature below 10°C (50° Fahrenheit) or higher than 30°C (86°
Fahrenheit).
•
Install the device only on a flat, horizontal surface. Setting on an inclined surface can cause incorrect
operation, permanent damage to the device or cause fire.
•
No flammable items should be placed in direct contact and within a radius of 1 m / 3.28 ft around the device.
Do not place near curtains, net curtains, etc.
•
It is obligatory to have a carbon-dioxide or dry chemical extinguisher placed nearby the device.
•
The enabled device must not be moved. Wait for complete fuel burn-out, disconnect the power supply and
cool down the elements before moving the device.
•
The device should not be left without adult supervision.
•
Prevent handling of the device by persons not trained.
•
Do not attempt to make changes or repairs to the construction of the device on your own. Repairs can be
made only by a person trained to service the device.
•
Do not pour FANOLA liquid to a furnace, as it may cause damage of the device and cause fire. Pouring
FANOLA liquid to a burning furnace may cause a sudden ignition and can cause fire, burns and a risk to life.
•
Do not heat the FANOLA liquid before starting-up the device.
•
Do not start up the device if the FANOLA liquid spilled out from the container.
•
Do not cover the working device as it may cause fire.
•
Keep the device and fuel away from children, pets and unauthorized persons.
•
FANOLA liquid is not suitable for consumption. Avoid contact with skin and eyes.
•
Do not operate by the filler when the device is running.
•
Do not tamper with the elements inside the furnace body at the risk of burns, damage to the device or fire.
•
Some elements of the device heat up to high temperatures. Do not touch the area of the furnace of the
device as it may cause burns.
•
Do not place any decorative elements on the burner’s surface.
•
Warning! The glowing coil temperature
heats up to
1300
°
C. Touching the device while it is turned on may
cause burns.
•
Warning! The furnace heats up to high temperatures during operation!
•
WARNING! The first run can be made only after proper installation of the device and reading the manual
instructions!
•
WARNING! Prior to moving the appliance burn the fuel out and move the appliance slowly, in the
horizontal position, avoiding shaking. There is always some fuel left inside the device and if spilled the
sensors might get wet. If that happens the appliance will not work until the liquid evaporates.
