Copyright Planika Sp. z o.o.
www.planikafires.com
IG0033#08
2020-03-20
21
4.4.3.
Setting the Time
1.
Press
and
buttons simultaneously.
Day
flashes.
2.
Press
or
button to select a number to
correspond with the day of the week (1=Monday,
2 = Tuesday, 3 = Wednesday, 4 = Thursday,
5 = Friday, 6 = Saturday, 7 = Sunday).
3.
Press
and
buttons simultaneously.
Hour
flashes.
4.
To select hour press
or
button.
5.
Press
and
buttons simultaneously.
Minutes
flash.
6.
To select minutes press
or
button.
7.
To confirm press
and
buttons
simultaneously or wait.
4.4.4.
Switch on the Appliance / Igniting the Fire
Before operating make sure MANUAL knob on the GV60 valve is in the
ON
, full counter clockwise position.
WARNING!
When the pilot light is ignited, the motor turns automatically to maximum flame height. If the pilot flame
goes out for any reason, wait for 5 minutes before attempting to re-light it. If the pilot does not stay lit after several
tries, turn the main valve knob to
OFF.
1.
Open the valve of the gas cylinder (or gas
supply valve in the gas pipe).
2.
Press
button (One Button Ignition) or
and
button simultaneously (Two Button
Ignition) until two short beeps and a blinking
series of lines
confirms the start sequence
has begun; release button(s).
3.
Main gas flows once pilot ignition is confirmed.
4.
Handset automatically goes into Manual Mode
after main burner ignition.
