Copyright Planika Sp. z o.o.
www.planikafires.com
IG0033#08
2020-03-20
29
6.
MAINTENANCE AND UPKEEP
We recommend cleaning the pilot flame and the main burner unit before the device is started again and
after long intervals of inactivity.
6.1.
Testing and cleaning
Please check and clean as necessary:
•
The main burner - if necessary, remove broken parts of stones and dust.
•
Pilot burner and thermo-couple (if necessary, remove the existing sediment). In the event of visible damage
contact your dealer.
•
Igniter - gap between igniter and pilot flame should not be bigger than 5 mm.
•
Glass guards – check for dirt smudges or possible scratches or cracks. If cracks are present replace the glass
guard for a new one. To conduct this contact your dealer. Always replace the guard following any
maintenance/servicing.
•
Gas hose and pressure regulator (in case their expiry date is invalid replace these ancillaries for new ones).
•
If you encounter problems with the regulator, gas hose, burner or regulation valves do not try to fix these
parts. Contact your place of purchase, an authorised service or an importer in order to acquire genuine spare
parts. To ensure the device is working efficiently use only original spare parts.
•
Ensure controls, burners and circulating air passageways of the appliance are kept clean for safe operation.
6.2.
Glass guard cleaning
Most of the existing types of smudges may be wiped with a dry cloth. In case of more substantial smudge you may use
liquids normally applied to ceramic tiles or windows. Always dry the glass screen to avoid damp patches which could
irreversibly embed into the glass.
WARNING!!!
Avoid leaving fingerprints on the glass. They will be embedded into the glass and you will not be able to
clean them.
