30
L-350 MECHANICAL INSTALLATION GUIDE
POWER/COM CABLING FOR MOUNT
The L-Series mounts are shipped with the USB
cable and internal wiring for motors and en
-
coders pre-installed. However, the main AC
power-cord (and optional Ethernet) cable are
not installed prior to shipment. Both AC and
communication cables must be connected be
-
fore the mount can be opperated.
Connecting the AC power-cord and USB cable:
1) Plan the path:
The AC power-cord socket and USB cable sock
-
et are located within the mount cavity below
the access-panel that is centered on the top of
the lower section of the fork-arm. They will be
fed through the cable pass-through at the RA/
Azimuth Axis center-of-rotation. Whether it
will be more convenient to drop through from
above, be pushed up from below, or pulled up
from below by a tether is ultimately related to
the cable-routing that will take place through
the pier and beyond.
2) Plug in:
Plug each cable into its respective socket, in
-
side the mount. Then attach to the AC source
and USB port on your PC or hub.
If Ethernet will be used for PC/mount com
-
munication, instead of USB, cable-routing will
proceed identically. The Ethernet socket is lo
-
cated on the same electronics panel as the USB
socket.
Содержание L-350
