13
Unpacking the optional EQ Wedge:
The optional equatorial wedge is fully assem
-
bled for shipment. Unpack and separate the
sub-assemblies and move them near your pier.
The EQ wedge weighs approximately 100
pounds. While it may be possible for it to be
moved while fully assembled, the unit will need
to be disassembled to be installed.
The wedge is comprised of three major sub-as
-
semblies: the angled wedge section, the upper
mounting plate (attaches the wedge to lower
mounting plate), and the lower mounting plate
(attaches upper mounting plate to pier)
1) Remove the altitude-adjustment bolts on
the north and south side of the wedge, and re
-
move the wedge section.
2) Remove the bolts that secure the un-anod
-
ized rotation-hub (located around the center
of the upper mounting plate), and remove the
hub from the center-holes of the two plates.
3) Remove the six bolts that join the perimeter
of the upper and lower mounting plates, and
remove the upper mounting plate.
Installation will be addressed below, and
should be completed prior to re-assembling
the mount after its unpacking.
Important note on the gear-ratio of the L-350
wedge:
- Altitude Adjustment is 0.55 degrees/turn
- Azimuth Adjustment is 0.41 degrees/turn
Содержание L-350
