12
L-350 MECHANICAL INSTALLATION GUIDE
Removing the Drive-Base:
1) Remove the 6 bolts from the lower perime
-
ter of the drive-base, which are currently secur
-
ing the drive-base to the bottom of the crate.
The motor flange through which the anchor
bolts are attached is highlighted in the model
to the right.
2) Verify installation and proper tightening
of the Azimuth/RA axis locking-knob (shown
in System Diagram 2, at the beginning of the
manual, and the model to the right). Not doing
so will allow the lifting surface (black-anodized
mounting plate for the fork-arm) to rotate, and
may make it difficult to lift and maneuver the
drive-base.
3) Ensure that the cables which connect the
drive-base electronics/motor to the main elec
-
tronics in the fork-arm are safely-positioned,
and not at risk of being snagged or sheared.
4) The drive-base is now ready for remov
-
al from the crate’s mounting-plate. However,
there is no need to lift it until the pier or op
-
tional wedge are ready to receive the drive-
base.
Dovetails / other accessories:
The dovetail saddle and other accessories may
be packed within boxes mounted to the floor
of the crate. Be sure to open any boxes and
inventory the contents.
Содержание L-350
