3.8 Basic Wireless Settings
Open “
Basic Settings
” in “
Wireless
” as below to make basic wireless configuration.
Figure 15 Basic Wireless Settings
Disable Wireless LAN Interface
Check this option to disable WLAN interface, then the wireless module of WNAP-6300 will stop
working and no wireless device can connect to it.
Wireless Mode
Four operating modes are available on WNAP-6300.
Wireless Client
: The WNAP-6300 is able to connect to the AP and thus join the wireless
network around it.
AP
: The WNAP-6300 establishes a wireless coverage and receives connectivity from other
wireless devices.
Bridge
: The WNAP-6300 establishes wireless connectivity with other APs by keying in remote
MAC address. Please refer to the “
WDS Setting
” for detailed configuration.
AP+Bridge
: The WNAP-6300 servers as AP and Bridge concurrently. In other words, the
WNAP-6300 can provide connectivity services for CPEs under WDS mode.
Wireless Network Name (SSID)
This wireless network name is shared among all associated devices in your wireless network.
Chapter 3 Basic Settings Page 28