Chapter 3 Basic Settings Page 13
Chapter 3 Basic Settings
3.1 Factory Default Settings
We’ll elaborate the WNAP-6300 factory default settings. You can re-acquire these parameters by
default. If necessary, please refer to the “
Restore Factory Default Settings
”.
Table 1 WNAP-6300 Factory Default Settings
Features
Factory Default Settings
Username admin
Password admin
Wireless Device Name
apXXXXXX (X represents the last 6
digits of Ethernet MAC address)
Operating Mode
AP
Data Rate
Auto
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Gateway 0.0.0.0
Primary DNS Server
0.0.0.0
LAN
Secondary DNS Server
0.0.0.0
Spanning Tree
Enable
802.11 Mode
802.11b/g/n
Channel Number
6
SSID Wireless
Broadcast SSID
Enable
HT Protect
Disable
Data Rate
Auto
Output Power
100% (Full)
Channel Mode
20MHz
WMM Enabled
RTS Threshold (byte)
2346
Fragmentation Length (byte)
2346
Beacon Interval
100
DTIM Interval
1
Space in Meter
0
Flow Control by AP
Disable
Security Open
System
Encryption None