Planet WGSW-24000 Скачать руководство пользователя страница 78

Страница: 78 / 158

user. Dynamic entries are added to the table as a result of a learning process or protocol.

▫

Component -

The component that is responsible for this entry in the Multicast Forwarding

Database. Possible values are IGMP Snooping, GMRP, and Static Filtering.

▫

Description -

The text description of this multicast table entry.

▫

Interfaces -

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

▫

Forwarding Interfaces -

The resultant forwarding list is derived from combining all the

component's forwarding interfaces and removing the interfaces that are listed as the static filtering

interfaces.

7.6.42 show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is selected,

all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan must also be

entered and the Static MAC Filter information will be displayed only for that MAC address and VLAN.

▫

Format

show mac-address-table static {<macaddr> <vlanid> | all}

▫

Mode

Privileged EXEC

▫

MAC Address -

Is the MAC Address of the static MAC filter entry.

▫

VLAN ID -

Is the VLAN ID of the static MAC filter entry.

▫

Source Port(s) -

Indicates the source port filter set's slot and port(s).

▫

Destination Port(s) -

Indicates the destination port filter set's slot and port(s).

7.6.43 show mac-address-table staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table.

▫

Format show mac-address-table staticfiltering

▫

Mode

Privileged EXEC

▫

Mac Address -

An unicast MAC address for which the switch has forwarding and or filtering

information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for

example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.

▫

Type -

This displays the type of the entry. Static entries are those that are configured by the end

user. Dynamic entries are added to the table as a result of a learning process or protocol.

▫

Description -

The text description of this multicast table entry.

▫

Interfaces -

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

7.6.44 show mac-address-table stats

This command displays the Multicast Forwarding Database (MFDB) statistics.

▫

Format show mac-address-table stats

▫

Mode

Privileged EXEC

▫

Total Entries -

This displays the total number of entries that can possibly be in the Multicast

Forwarding Database table.

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 78 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: