Planet WGSW-24000 Скачать руководство пользователя страница 67

Страница: 67 / 158

▫

Mode

Interface Config

7.6.14 port lacpmode all

This command enables Link Aggregation Control Protocol (LACP) on all ports.

▫

Format

port lacpmode all

▫

Mode

Global Config

7.6.14.1 no port lacpmode all

This command disables Link Aggregation Control Protocol (LACP) on all ports.

▫

Format

no port lacpmode all

▫

Mode

Global Config

7.6.15 port-channel

This command configures a new port-channel (LAG) and generates a logical slot and port number for it.

Display this number using the "show port-channel".

Note

Before including a port in a port-channel, set the port physical mode. See

'speed'

command.

▫

Format port-channel <name>

▫

Mode

Global Config

7.6.16 port-channel adminmode

This command enables a port-channel (LAG). The interface is a logical slot and port for a configured

port-channel. The option all sets every configured port-channel with the same administrative mode

setting.

▫

Format

port-channel adminmode {<logical slot/port> | all}

▫

Mode

Global Config

7.6.16.1 no port-channel adminmode

This command disables a port-channel (LAG). The interface is a logical slot and port for a configured

port-channel. The option all sets every configured port-channel with the same administrative mode

setting.

▫

Format

no port-channel adminmode {<logical slot/port> | all}

▫

Mode

Global Config

7.6.17 port-channel linktrap

This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot

and port for a configured port-channel. The option all sets every configured port-channel with the same

administrative mode setting.

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 67 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: