Planet WGSW-24000 Скачать руководство пользователя страница 74

Страница: 74 / 158

7.6.32.1 no set gvrp interfacemode

This command disables GVRP (GARP VLAN Registration Protocol) for a specific port. If GVRP is

disabled, Join Time, Leave Time and Leave All Time have no effect.

▫

Format

no set gvrp interfacemode

▫

Mode Interface Config

7.6.33 set gvrp interfacemode all

This command enables GVRP (GARP VLAN Registration Protocol) for all ports.

▫

Default Disabled

▫

Format

set gvrp interfacemode all

▫

Mode

Global Config

7.6.33.1 no set gvrp interfacemode all

This command disables GVRP (GARP VLAN Registration Protocol) for all ports. If GVRP is disabled,

Join Time, Leave Time and Leave All Time have no effect.

▫

Format

no set gvrp interfacemode all

▫

Mode

Global Config

7.6.34 show description

This command displays the port description information for one or all interfaces.

▫

Format

show description {<slot/port> | all}

▫

Mode

Privileged EXEC and User EXEC

7.6.35 show garp

This command displays Generic Attributes Registration Protocol (GARP) information.

▫

Format show garp

▫

Mode

Privileged EXEC and User EXEC

▫

GMRP Admin Mode -

This displays the administrative mode of GARP Multicast Registration

Protocol (GMRP) for the system.

▫

GVRP Admin Mode -

This displays the administrative mode of GARP VLAN Registration Protocol

(GVRP) for the system.

7.6.36 show gmrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one or all

interfaces.

▫

Format

show gmrp configuration {<slot/port> | all}

▫

Mode

Privileged EXEC and User EXEC

▫

Interface -

This displays the slot/port of the interface that this row in the table describes.

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 74 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: