Planet WGSW-24000 Скачать руководство пользователя страница 117

Страница: 117 / 158

Note

This command effectively disables DiffServ on an interface (in a particular direction). There is

no separate interface administrative 'mode' command for DiffServ.

▫

Format

no service-policy {in | out} <policymapname>

▫

Modes

Global Config (for all system interfaces)

Interface Config (for a specific interface)

8.7 Show Commands

The 'show' command set is used in DiffServ to display configuration and status information for:

。

Classes

。

Policies

。

Services

This information can be displayed in either summary or detailed formats. The status information is only

shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.

There is also a 'show' command for general DiffServ information that is available at any time.

8.7.1 show class-map

This command displays all configuration information for the specified class. The <classname> is the

name of an existing DiffServ class.

。

Format show class-map [<classname>]

。

Mode Privileged EXEC and User EXEC

If the Class Name is specified the following fields are displayed:

▫

Class Name -

The name of this class.

▫

Class Type -

The class type (all, any, or acl) indicating how the match criteria are evaluated for this

class. A class type of all means every match criterion defined for the class is evaluated

simultaneously they must all be true to indicate a class match. For a type of any each match

criterion is evaluated sequentially and only one need be true to indicate a class match. Class type

acl rules are evaluated in a hybrid manner, with those derived from each ACL Rule grouped and

evaluated simultaneously, while each such grouping is evaluated sequentially.

▫

Match Criteria -

The Match Criteria fields will only be displayed if they have been configured. They

will be displayed in the order entered by the user. These are evaluated in accordance with the

class type. The possible Match Criteria fields are: Class of Service, Destination IP Address,

Destination Layer 4 Port, Destination MAC Address, Every, IP DSCP, IP Precedence, IP TOS,

Protocol Keyword, Reference Class, Source IP Address, Source Layer 4 Port, Source MAC

Address, and VLAN.

▫

Values -

This field displays the values of the Match Criteria.

▫

Excluded -

This field indicates whether or not this Match Criteria is excluded.

If the Class Name is not specified, this command displays a list of all defined DiffServ classes. The

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 117 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: