Planet WGSW-24000 Скачать руководство пользователя страница 121

Страница: 121 / 158

▫

DiffServ Admin Mode -

The current setting of the DiffServ administrative mode. An attached policy

is only in effect on an interface while DiffServ is in an enabled mode.

▫

Interface -

The slot number and port number of the interface (slot/port).

▫

Direction -

The traffic direction of this interface service, either in or out.

▫

Operational Status -

The current operational status of this DiffServ service interface.

▫

Policy Name -

The name of the policy attached to the interface in the indicated direction.

▫

Policy Details -

Attached policy details, whose content is identical to that described for the show

policy-map <policymapname> command (content not repeated here for brevity).

8.7.5 show diffserv service brief

This command displays all interfaces in the system to which a DiffServ policy has been attached. The

direction parameter is optional; if specified, only services in the indicated direction are shown, otherwise

service information is shown for both directions, where applicable.

▫

Format

show diffserv service brief [in | out]

▫

Mode

Privileged EXEC

▫

DiffServ Mode -

The current setting of the DiffServ administrative mode. An attached policy is only

active on an interface while DiffServ is in an enabled mode.

The following information is repeated for interface and direction (only those interfaces configured with an

attached policy are shown):

Interface -

The slot number and port number of the interface (slot/port).

Direction -

The traffic direction of this interface service, either in or out.

OperStatus -

The current operational status of this DiffServ service interface.

Policy Name -

The name of the policy attached to the interface in the indicated direction.

8.7.6 show policy-map interface

This command displays policy-oriented statistics information for the specified interface and direction. The

<slot/port> parameter specifies a valid slot number and port number for the system. The direction

parameter indicates the interface direction of interest.

Note

This command is only allowed while the DiffServ administrative mode is enabled.

▫

Format

show policy-map interface <slot/port> <in | out>

▫

Interface -

The slot number and port number of the interface (slot/port).

▫

Direction -

The traffic direction of this interface service, either in or out.

▫

Operational Status -

The current operational status of this DiffServ service interface.

▫

Policy Name -

The name of the policy attached to the interface in the indicated direction.

▫

Interface Offered Octets/Packets -

A cumulative count of the octets/packets offered to this

service interface in the specified direction before the defined DiffServ treatment is applied.

▫

Interface Discarded Octets/Packets -

A cumulative count of the octets/packets discarded by this

Содержание WGSW-24000































































































































































Результаты поиска

Содержание WGSW-24000

Отзывы:

Planet WGSW-24000, Руководство пользователя, Страница: 121 / 158

Результаты поиска

Содержание WGSW-24000

Отзывы: