User’s Manual of FSD-804PS
4.5.1 VLAN Group
The VLAN Group page contains fields for managing VLAN mode of the Switch and setting ports that are part of a VLAN.
The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All untagged packets arriving to the
device are tagged by the ports PVID. The screen in
Figure 4-16
and
4-17
appears.
The VLAN mode had three modes:
■
Disable (No VLAN)
■
Port-Based VLAN
■
802.1Q VLAN
This function group individual ports into a small
“Virtual”
network of their own to be independent of the other ports. The
screen in Figure 3-6 appears.
The Switch supports
Port-based
and
802.1Q
(Tagged-based) in Web management page. In the default configuration,
VLAN support is “
Disable
”.
Figure 4-23
VLAN Group screenshot
Object
Description
VLAN Type
There’re three VLAN mode support – 802.1Q VLAN, Port-Bas VLAN and Disable (No VLAN).
•
802.1Q
– Packets income will be tagged with VID as the PVID setting. All ports on the switch
belong to default VLAN (VID 1).
•
Port-Base
- Packets can only be broadcast among other members of the same VLAN group.
Note all unselected ports are treated as belonging to the default system VLAN.
•
Disable
- Forbidden ports are not included in the VLAN
If Port-based VLAN are enabled, then VLAN-tagging feature is ignored.
- 37 -
