User’s Manual of FSD-804PS
The page includes the following configurable data:
Object
Description
DHCP Client
Choose what the Switch should do following power-up: transmit a DHCP request, or manual
setting (Disable).
The DHCP client function only works if you haven't assigned a static IP address that different
than the Switch default IP. Once the default IP has been changed the DHCP will not effective
and the Switch will continue using the manually entered static IP. If you have changed the
Switch to a static IP address, you can set the IP address back to its default IP address or you
can reset the Switch back to factory default. And then you can enable the DHCP client function
to work.
The factory default is
Disable
.
IP Address
The IP address of the Switch. The factory default value is
192.168.0.100.
Subnet Mask
The IP subnet mask of the Switch. The factory default value is
255.255.255.0.
Gateway
The default gateway of the Switch. The factory default value is
192.168.0.254
.
Description
This field helps to identify the description of Switch.
4.3.3 Password Setting
This section provides password change Configuration of FSD-804PS, please input the old password in “
Old Password”
space and input the new password in
“New Password”
space then input the new password in
“Confirm”
. After setup
completed, please press
“Apply”
button to take effect and the Switch will logout automatically. Please login web interface
with new password, the screen in
Figure 4.6
appears.
Figure 4-6
Password Setting screen
- 23 -
