User’s Manual of FSD-804PS
2.6 Product Application
2.6.1 Connecting end node or Switch
1. Place the FSD-804PS on a smooth surface or fasten the mounting brackets purchased separately with the pro-
vided screws in a standard 19” rack.
2. Connect the power cord to the power inlet socket of FSD-804PS and the other end into the local power source
outlet. When the Switch receives power, the Power LED should remain solid Green.
3. Connect other switch or PC to one port of the FSD-804PS using Category 3/4/5 UTP/STP cabling.
4. Connect another switch or PC to the other port of FSD-804PS by following the same process as described in Step
3.
Figure 2-7
End node or Switch connection
Cable distance for Switch
The cable distance between the FSD-804PS and PC should not exceed 100 meter for UTP/STP
cable.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation. To reliably operate your network at
100Mbps, you must use an Unshielded Twisted-Pair (UTP) Category 5 cable, or better Data Grade
cabling. While a Category 3 or 4 cables may initially seem to work, it will soon cause data loss
.
- 14 -