Planet ADE-3100, Руководство пользователя

Страница: 26 / 49

21
NAT: Use this field to Enable/Disable NAT. Default is Enable.
Mode: Options for the NAT dropdown menu are:
l
NAT: Static peer-to-peer mode (1x1).
l
NAPT: Static multiple mapping mode (1xN).
l
Dynamic NAPT (default): Dynamic multiple mapping mode (NxN).
Session Name: It allows you to select the session from the configured NAT Session Name Configuration.
User
’
s IP: It allows you to assign the IP address to map the corresponding NAT/NAPT sessions.
Session Name Status: This table will be displayed at the middle of the page to show the Session Name
with its corresponding IP Address.
Number of NAT Configurations: It displays the total number of NAT Sessions entered.
Available Sessions: This table will be displayed at the bottom of the page to show all the available
Session Names with their corresponding WAN Interface.
Number of Sessions: It displays the total number of NAT Sessions entered.
5.6 Virtual Server Configuration
The Virtual Server Configuration page allows you to set the configuration of the Virtual Server. Virtual
Servers are used for port forwarding from the WAN to LAN networks. All UDP/TCP ports are protected from
intrusion. If any specific local PCs need to be mapped to the UDP/TCP port on WAN side, please input the
mappings here. There can be up to 20 different Virtual Server Configurations.