Planet ADE-3100, Руководство пользователя

Страница: 19 / 49

14
Address Pool Selection.
Range: x.x.x.x, where 0
≤
x
≤
255 Default: 10.0.0.4
User Defined End Address: It is the last IP address in the DHCP pool for User Defined DHCP Address
Pool Selection.
Range: x.x.x.x, where 0
≤
x
≤
255 Default: 10.0.0.15
DHCP Gateway Selection: The default setting for the DHCP Gateway Selection is Automatic . You can
select User Defined and specify User Defined Gateway Address .
The DHCP server will issue the User Defined Gateway Address to the LAN DHCP clients.
User Defined Gateway Address: The purpose for the User Defined Gateway Address is to have two
gateway addresses, as the LAN IP Address at the top of the LAN Configuration page is also a gateway
address.
Lease time: The Lease time is the amount of time a network user will be allowed to connect with DHCP
server. If all fields are 0, the allocated IP addresses will be effective forever.
Ranges for Lease Time fields: Days 0-36500, Hours 0-23, Minutes 0-59, Seconds 0-59, default value is 1
days 0 hours 0 minutes 0 seconds.
User mode:
Under the Single User mode, the DHCP server only allocates one IP address to a local PC.
Under the Multiple User mode (default), the DHCP server allocates the IP addresses specified by the
DHCP address pool.
Save Configuration: Clicking this will link you to the Save Settings / Reboot page.
5.3.2 Ethernet Mode Setting
The Ethernet Mode configuration page allows you to set the LAN port into the following modes:
l
AutoSense (default): The Router will automatically sense which mode to use, selecting between 100
Mbps Full Duplex, 100 Mbps Half Duplex, 10 Mbps Full Duplex, and 10 Mbps Half Duplex.
l
100 Mbps Full Duplex: Data can be transferred and received simultaneously at the transfer rate of
100 Mega-bits per second.
l
100 Mbps Half Duplex: Data cannot be transferred and received at the same time. For example,
data can be sent, and once the transmission is complete, data can be received. This is done at a
transfer rate of 100 Mega-bits per second.
l
10 Mbps Full Duplex: Data can be transferred and received simultaneously at the transfer rate of 10
Mega-bits per second.
l
10 Mbps Half Duplex: Data cannot be transferred and received at the same time. For example, data
can be sent, and once the transmission is complete, data can be received. This is done at a transfer
rate of 10 Mega-bits per second.