Planet ADE-3100, Руководство пользователя

Страница: 11 / 49

6
4.2 PPP Page
The PPP Status page shows the status of each PPP session for each PPP interface. This page contains
information that is dynamic and will refresh every 8 seconds.
?
Note
PPP interfaces can be created, modified, and deleted in the PPP Configuration page. Refer
to Section 5.4 for further information.
PPP (Point-to-Point Protocol): The table displays the following fields:
l
Connection Name: This is user defined. User defined connections for PPP can be created in PPP
Configuration page.
l
Interface: States the interface that is being used (PVC0 ... PVC7).
l
Mode: There are two available modes for the connection:
PPP over Ethernet (PPPoE)
PPP over ATM (PPPoA)
l
Status: States whether PPP connection is Connected or Not Connected.
l
Packets Sent: Number of packets sent by a particular PPP Connection.
l
Packets Received: Number of packets received by a particular PPP Connection.
l
Bytes Sent: Number of bytes sent by a particular PPP Connection.
l
Bytes Received: Number bytes received by a particular PPP Connection.
Connect and Disconnect: It allows you to manually connect/disconnect the PPP connection for each PPP
interface. In other words, each PPP session can be connected and disconnected individually.
l
Connection #: Specifies the PPP session to be connected/disconnected.
l
Connect/Disconnect Execute: Press this button to either connect or disconnect.
Connection status dialog will be displayed below the Execute button after it is pressed.
Sample dialog with explanation:
l
PPP X: Connecting... This is displayed while the PPP session is attempting to connect to the ISP.
l
PPP X: Connect ERROR This is displayed when a connection cannot be made due to an error.
l
PPP X: is currently not connected This is displayed when a disconnect attempt is made on a
session that is not currently connected.
l
PPP X: does not exist! This is displayed when a connect or disconnect attempt is made on a
session number that does not exist.