9
5. Configuration Pages
The links under
Configuration
column are associated to the pages that represent the configurations of
system and interfaces. These pages can be viewed and modified by both user and admin accounts.
?
Note
When any settings are changed, please go to the Save Settings page to save the new
setting(s) and reboot the Router. Changes will not take effect until the settings are saved and
the Router is rebooted. If power is lost before saving, all new configurations since the last
save will be lost, even if they were submitted.
5.1 Modes
Table 5-1 lists the mode configurations.
Table 5-1 Mode Configuration
WAN
Configuration
Bridge Mode
Router Mode
(PPPoA/PPPoE)
Router Mode
(Dynamic IP)
Router Mode
(Static IP)
Half Bridge
IP Address
N/A
Automatically
assigned by ISP
Automatically
assigned by ISP
Provided by ISP Automatically
assigned by ISP
Subnet Mask
N/A
Automatically
assigned by ISP
Automatically
assigned by ISP
Provided by ISP Automatically
assigned by ISP
Gateway
N/A
Automatically
assigned by ISP
Automatically
assigned by ISP
Provided by ISP Automatically
assigned by ISP
Encapsulation
1483 Bridged IP
LLC, 1483
Bridged IP
VC-Mux
PPPoA
LLC/VC-Mux,
PPPoE
LLC/VC-Mux
1483
Bridged/Routed
IP LLC, 1483
Bridged/Routed
IP VC-Mux,
Classical IP over
ATM
1483
Bridged/Routed
IP LLC, 1483
Bridged/Routed
IP VC-Mux,
Classical IP over
ATM
PPPoA
LLC/VC-Mux,
PPPoE
LLC/VC-Mux
Bridge
Enabled
Disabled
Disabled
Disabled
Disabled
PPP Service
N/A
Provided by ISP
N/A
N/A
Provided by ISP
PPP User Name
N/A
Provided by ISP
N/A
N/A
Provided by ISP
PPP Password
N/A
Provided by ISP
N/A
N/A
Provided by ISP
DHCP Client
Enable
Unchedked
Unchedked
Checked
Unchedked
Unchedked
PPP Half Bridge
Disabled
Disabled
Disabled
Disabled
DHCP Server
Disabled
Enabled
Enabled
Enabled
NAT
Disabled
Enabled (Dynamic
NAPT)
Enabled
(Dynamic NAPT)
Enabled
(Dynamic NAPT)
Disabled
DNS Proxy
Disabled
Enabled
Enabled
Enabled
Disabled
Bridge Mode:
Bridge Mode is used when there is one PC connected to the LAN-side Ethernet port. IEEE
802.1D method of transport bridging is used to bridge between the WAN (ADSL) side and the LAN
(Ethernet) side, i.e., to store and forward.
Router Mode:
Router Mode is used when there is more than one PC connected to the LAN-side Ethernet
port. This enables the ADSL WAN access to be shared with multiple nodes on the LAN. Network Address
Translation (NAT) is supported so that one WAN-side IP address can be shared among multiple LAN-side
devices. DHCP is used to serve each LAN-side device and IP address.
Содержание ADE-3100
Страница 1: ...ADSL Modem Router ADE 3100 ADE 4100 User s Manual...
Страница 49: ...44...