Planet Networking & Communication SGS-6340-16XR Скачать руководство пользователя страница 708

Страница: 708 / 984

40-156

Parameters:

<sIpAddr>

is the source IP address, the format is dotted decimal notation;

sMask

is the reverse mask of source

IP, the format is dotted decimal notation;

<dIpAddr>

is the destination IP address, the format is dotted decimal

notation;

dMask

is the reverse mask of destination IP, the format is dotted decimal notation, attentive position o,

ignored position 1;

igmp

type

, the type of igmp, 0-15;

<icmp-type>

, the type of icmp, 0-255 ;

<icmp-code>,

protocol No. of icmp, 0-255;

<prec>

, IP priority, 0-7;

<tos>

, to value, 0-15;

<sPort>

, source port No., 0-65535;

<sPortMin>

, the down boundary of source port;

<sPortMax>

, the up boundary of source port;

<dPort>

, destination

port No. 0-65535;

<dPortMin>

the down boundary of destination port;

<dPortMax>

, the up boundary of destination

port;

<time-range-name>

, time range name.

Command Mode:

Name extended IP access-list configuration mode

Default:

No access-list configured.

Examples:

Create the extended access-list, deny icmp packet to pass, and permit udp packet with destination address 192. 168.

0. 1 and destination port 32 to pass.

Switch(config)# access-list ip extended udpFlow

Switch(Config-IP-Ext-Nacl-udpFlow)#deny igmp any any-destination

Switch(Config-IP-Ext-Nacl-udpFlow)#permit udp any host-destination 192.168.0.1 d-port 32

40.19 permit | deny(ip standard)

Command:

{deny | permit} {{

<sIpAddr>

<sMask>

} | any-source | {host-source

<sIpAddr>

}}

no {deny | permit} {{

<sIpAddr>

<sMask>

} | any-source | {host-source

<sIpAddr>

}}

Functions:

Create a name standard IP access rule, and “

no {deny | permit} {{

<sIpAddr>

<sMask>

} | any-source |

{host-source

<sIpAddr>

}}

” action of this command deletes this name standard IP access rule.

Parameters:

<sIpAddr>

is the source IP address, the format is dotted decimal notation;

sMask

is the reverse mask of source

IP, the format is dotted decimal notation.

Содержание SGS-6340-16XR

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SGS-6340-16XR

Отзывы:

Planet Networking & Communication SGS-6340-16XR, Руководство по управлению, Страница: 708 / 984

Результаты поиска

Содержание SGS-6340-16XR

Отзывы: