24-52
Function:
Enable the RIP routing process and enter the RIP mode; the “
no router rip
” command closes the RIP routing
protocol.
Default:
Not running RIP route.
Command Mode:
Global mode
Usage Guide:
This command is the switch for starting the RIP routing protocol which is required to be open before configuring other
RIP protocol commands.
Example:
Enable the RIP protocol mode
Switch(config)#router rip
Switch(config-router)#
24.32 send-lifetime
Command:
send-lifetime <
start-time
> {<
end-time
>| duration
<seconds>
| infinite}
no send-lifetime
Function:
Use this command to specify a key on the keychain as the time period of sending keys. The “
no send-lifetime
”
cancels this configuration.
Parameter:
<
start-time
>
parameter specifies the starting time of the time period, which is:
<
start-time
>={
<hh:mm:ss> <month> <day> <year>|<hh:mm:ss> <day> <month> <year>
}
<hh:mm:ss>
Specify the concrete valid time of
accept-lifetime
in hours, minutes and second
<day>
Specifies the date of valid, ranging between 1 -31
month>
Specifies the month of valid shown with the first three letters of the month, such as Jan