Planet Networking & Communication ICA-3260 Скачать руководство пользователя страница 66

Страница: 66 / 88

60fps Full HD IR Bullet IP Camera

ICA-3260

Delete:

Clicking this button will delete a window on the image screen.

Name:

Name of the specified VMD window.

Sensitivity

Define the sensitivity value of object detection. The higher value will
be more sensitivity.

Detection Response

Set the response velocity of motion detection.

Min. Inspection Trigger Size:

Specify the minimum detection size.

Max. Inspection Trigger Size:

Specify the maximum detection size.

Moving shadow exemption:

Set ON/OFF for the moving shadow exemption function of object
detection. Selecting Do Not Respond to Shadows will prevent the
shadows of a moving object from being recognized as moving
objects

Note: This function is not recommended for camera with
PTZ/ePTZ actions.

3.14 Storage Configuration

This page shows the status of the attached Samba server. You may also set up related
parameters to manage the attached Samba server.

Host

Type the server name or the IP address of the SAMBA server.

Share

Set working directory path of SAMBA server.

User Name

Type the user name for the SAMBA server

Password

Type the password for the SAMBA server.

Содержание ICA-3260

























































































Результаты поиска

Содержание ICA-3260

Отзывы:

Planet Networking & Communication ICA-3260, Руководство пользователя, Страница: 66 / 88

Результаты поиска

Содержание ICA-3260

Отзывы: