Planet Networking & Communication ICA-3260 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 88

Planet Networking & Communication ICA-3260 Скачать руководство пользователя страница 61

60fps Full HD IR Bullet IP Camera

ICA-3260

Authentication

Password

Type the password for the SMTP server if Authentication is
Enabling.

E-mail From

Type the sender’s E-mail address. This address is used for reply
e-mails.

E-mail To

Type the receiver’s e-mail address.

E-mail Subject

Type the subject/title of the e-mail.

3.13 Event Detection Configuration

This device supports 5 types of event detection: Object Detection, Camera Tampering, Audio
Detection, Face Detection, and Cross Line Detection.

3.13.1 Object Detection

Object Detection responds to some kind of object actions in the captured image which will
trigger an alarm.

An alarm will be triggered when an object is entering or passing through a specified area or
when an object has been left or removed from a guarded area.

Add and Delete

To add or delete the motion windows. User can specify up to 4
included and /or excluded windows to monitor the video captured by
this device. By dragging mouse on the image, you can change the
position and size of the selected motion window accordingly.

Name

Name of the specified motion window.

57

«
...
59
60
61
62
63
...
»

Содержание ICA-3260

























































































Отзывы:

Нет отзывов