Planet Networking & Communication ICA-3260 Скачать руководство пользователя страница 59

 

60fps Full HD IR Bullet IP Camera 

ICA-3260

 

Viewer Login

 

Select “Anonymous” to allow any one viewing the video once 

connected. Otherwise, only users in database can view the 

video after login. 

Access Right

 

Administrator can access every function in this device. 

However, Viewers only can view the video and access 

limited function.   

PTZ Control

 

Authorize this user to control PTZ function or not. 

Add, update, and remove 

of Users account 

Manage the user’s account of viewer user. 

3.11 Protocol Configuration 

3.11.1 ONVIF

 

ONVIF is a global and open industry forum with the goal to facilitate the development and use 
of a global open standard for the interface of physical IP-based security products. In other 
words, it creates a standard for how IP products within video surveillance and other physical 
security areas can communicate with each other.

 

 

 

 

3.11.2 SNMP 

Simple Network Management Protocol

 (

SNMP

) is an "Internet-standard protocol for 

managing devices on IP networks". Devices that typically support SNMP include routers, 
switches, servers, workstations, printers, and more. It is used mostly in network management 
systems to monitor network-attached devices for conditions that warrant administrative 
attention.  
 
SNMP is a component of the Internet Protocol Suite as defined by the Internet Engineering 
Task Force (IETF). It consists of a set of standards for network management, including an 
application layer protocol, a database schema, and a set of data objects. SNMP exposes 
management data in the form of variables on the managed systems, which describe the 
system configuration. These variables can then be queried (and sometimes set) by managing 
applications. 

 

 

55

Содержание ICA-3260

























































































Отзывы: