Planet Networking & Communication ICA-3260 Скачать руководство пользователя страница 31

Страница: 31 / 88

60fps Full HD IR Bullet IP Camera

ICA-3260

Image Monitoring
Section

The image shot by the camera is shown here. The date and time are
displayed at the top of the window.

Video Profile

The camera support multi-profile for three compressions H264 and
M-JPEG simultaneously. User can choose the proper and/or
preferred profile here.

Full Screen

Click this button to display the image in full-screen mode (uses every
available space to display the image captured by this camera).

2-way Audio

The Internet Camera supports 2-way audio function. User can
choose to enable or disable this function by toggling the icon below.

: Disable audio uploading function.

: Enable audio uploading function.

ActiveX Control

The plug-in ActiveX control supports a lot of functions by clicking the
left mouse button. Note that this feature only supports on the ActiveX
control within Microsoft® Internet Explorer.

This function is in a detailed setting for the camera that is only
available for user logged into camera as administrator.

Item

Action

Network

Configure Network settings such as IPv6, ONVIF,
DHCP, DDNS, 3GPP, PPPoE and UPnP.

Setting Menu

Camera

Adjust camera parameters.

2-way Audio

Client Menu

Setting Menu

Language

Streaming Protocol

Video Profile

ActiveX Control

Image Monitoring Section

Video Information
(Show Status Bar)

Full Screen

Содержание ICA-3260

























































































Результаты поиска

Содержание ICA-3260

Отзывы:

Planet Networking & Communication ICA-3260, Руководство пользователя, Страница: 31 / 88

Результаты поиска

Содержание ICA-3260

Отзывы: