manualshive.com logo in svg

Planet Networking & Communication ICA-3260, Руководство пользователя, Страница: 62 / 88

Поделиться
Скачать
Planet Networking & Communication ICA-3260 Скачать руководство пользователя страница 62

 

60fps Full HD IR Bullet IP Camera 

ICA-3260

 

Type 

Entrance - A moving object exists inside the guarded area. 

Theft - A static object has been removed from the guarded area. 

Desertion - A moving object has been left in the guarded area. 

Time until theft/desertion 

object is detected 

Specify the reference interval in seconds 

Min. Inspection Trigger 

Size 

Specify the minimum trigger size of motion. 

Max. Inspection Trigger 

Size 

Specify the maximum trigger size of motion. 

Slow Trigger Speed 

Specify the minimum speed to be detected. 

Fast Trigger Speed 

Specify the maximum speed to be detected. 

Adjust VMD 

Specify the video motion detection details. 

Enable / Disable:

 

Select Enable to activate the function to detect object. The dynamic 
object will be displayed on the monitor in the blue frame. And the 
static object will be displayed on the monitor in the red frame. 
 

Add Detected: 

Clicking this button will add an active window on the image screen. 
User can drag to move the window or resize it. 

 
Add Non-Detected: 

Clicking this button will add an inactive window on the image screen. 
User can drag to move the window or resize it. 

 
Delete: 

Clicking this button will delete a window on the image screen. 

 

 

Name: 

Name of the specified VMD window.

 

 
Sensitivity 

Define the sensitivity value of object detection. The higher value will 
be more sensitivity.   

 

Detection Response 

Set the response velocity of motion detection. 

 

 
Min. Inspection Trigger Size: 

Specify the minimum detection size. 

 
Max. Inspection Trigger Size: 

Specify the maximum detection size. 

 

Moving Shadow Exemption: 

Set ON/OFF for the moving shadow exemption function of object 
detection. Selecting Do Not Respond to Shadows will prevent the 
shadows of a moving object from being recognized as moving 
objects

.

 

Note: This function is not recommended for camera with 
PTZ/ePTZ actions. 

 

58

Содержание ICA-3260

























































































Отзывы:

Нет отзывов