TC160 / TC320
NETWORKING GUIDE
(v.1.8)
www.planckvisionsystems.com
4
Figure 3: Device management interface
Step 3
Reconfigure the last ThermaCheck camera added to the network before connecting a new camera to
the network switch. To reconfigure the last camera:
1.
Open the Device Manager
in the ThermaCheck software. Confirm that the status of the last
camera added is "Online" and has the default IP address of 169.254.1.19.
2.
Click the settings button
for the device with the default IP address and select the [Network
Param] page.
3.
In the IP Address Box, change the last two digits of IP to match the value in Table 1. Click [Set]
to change the IP address. The camera will automatically restart, beeping three times on
completion.
Figure 4: Device parameter setting interface