TC160 / TC320
NETWORKING GUIDE
(v.1.8)
www.planckvisionsystems.com
5
4.
Click the [Manual] button in the Device Manager window. Enter a new
device name
and
IP
address
and click [Add]. The camera will come online with the new IP address, while the
former IP address will register as offline.
5.
Connect a new ThermaCheck camera to one of the ethernet ports on the switch panel.
Assuming that the new camera has the default IP address (169.254.1.19), the new camera
should come online automatically.
Figure 5: Manually add device interface
Step 4
1. To add additional cameras, Repeat Step 3 for each camera. A total of four cameras can be
monitored with the ThermaCheck software.
2. Note that camera names can be modified in the Device Manager interface. Select the pencil
icon
, to modify the text of the camera name as shown in Figure 6, and save the name by
selecting the disk icon
.
Figure 6: Device list interface
3. When finished adding cameras, close the Device Manager to return to the main user interface.