Planar UltraLux Series, Руководство по установке, Страница: 39 / 87

Planar UltraLux Series Installation Guide 39
SNMP Monitoring
The current settings and status of UltraLux units can be remotely monitored using
SNMP (Simple Network Management Protocol), if the SNMP option is enabled
through the web browser settings. The MIB (Management Information Base) used for
all Planar display products is available by electronic distribution in the file
PLANAR-
DISPLAY-MIB.txt
. The table below shows the objects that can be monitored – all
Planar SNMP objects are read-only, and no traps are used. The default read-only
community string for all Planar SNMP objects is “public”. Once the PLANAR-DISPLAY-
MIB is loaded in your SNMP manager, you can walk all the available objects from the
top-level object PlanarSystems(1.3.6.1.4.1.19125) or its sub-object
PlanarDisplayProduct(1).
Most object values are integer type, except where noted. Generally, for integer types,
the value -1 is returned if there is any internal system or communication error, and
normal return values are zero or positive integers.
Object Name Description Value
plnrModel Model name (string) UltraLux
plnrInputSelect User-selected input source 1 = HDMI, 2 = DisplayPort, 3 = VGA
plnrInputStatus Input source status 0 = Source Absent, 1 = Source Present
plnrDisplayBacklight Backlight on/off state 1 = On, 0 = Off
plnrDisplayBrightness User-selected brightness value 0-100
plnrDisplayContrast User-selected contrast value 0-100
plnrDisplaySharpness User-selected sharpness value 0-8
plnrDisplayColorSpace User-selected color space 0 = full color
2 = sRGB
plnrDisplayColorTemp User-selected color temperature 2 = 4200K
3 = 5000K
4 = 6500K
5 = 7500K
6 = 9300K
7 = user
plnrDisplayGainRed User-selected red gain value
Note: Gain values apply only
when color temperature
setting is 7 or user.
0-100
plnrDisplayGainGreen User-selected green gain value 0-100
plnrDisplayGainBlue User-selected blue gain value 0-100
plnrAudioVolume User-selected volume setting 0-100
plnrAudioMute User-selected audio mute 1 = On, 0 = Off
plnrPower1 Power supply #1 status 1 = OK, 0 = Failed
plnrPower2 Power supply #2 status 1 = OK, 0 = Failed