3
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1.
To clean the Network Display screen;
-- Power off the Network Display and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a soft cloth.
-- Gently clean the screen with dampened cloth.
2.
Do not place the Network Display near a window. Exposing the display to rain water, moisture or sunlight
can severely damage it.
3.
Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4.
Do not remove the cover or attempt to service this unit yourself. Servicing of any nature should be
performed by an authorized technician.
5.
Store (not connected to the AC power source) the Network Display in a room with a room temperature of
-20° ~ 60°C (or -4° ~ 140°F). Storing the Network Display outside this range could result in permanent
damage.
6.
If any of the following occurs, immediately unplug your monitor and call an authorized technician.
•
AC Power cable is frayed or damaged.
•
Liquid is spilled into the Network Display or it has been exposed to rain.
•
LCD display or the Network Display case is damaged.
7.
Only use the supplied main lead (AC Power Cord) to connect the monitor. For a nominal current up to 6A
and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm
2
must be used.
Important Recycle Instruction:
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT
WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK
WWW.LAMPRECYCLE.ORG.
Contains Mercury, Dispose of Properly
