background image

 

Power Modes 

The Network Display has three modes of operation. 
 

Figure 2-2

 

The following assumes the AC Power Adapter is connected to the display and an AC power source. 

 

Power Mode 

LED   

Operation Description 

Off 

Dark 

 

Power button is pressed for 3 Sec while in Standby mode (Thin 
client is switched off) 

 

Power button is pressed for 3 Sec while in Run mode (Thin client 
and display are switched off) 
     

Caution:    Be very careful to not turn off the Display while the operating 
system is downloading a software update! 

Run 

Green 

 

If the Power button is momentarily pressed when in the Off mode 
the display is powered and the thin client will boot. 

 

If the Power button is momentarily pressed while in Standby 
mode, the display returns to Run mode. 

Standby 

Yellow 

 

If the Power button is momentarily pressed while in Run mode the 
display is turned off while the Thin Client continues to operate. 
This mode can be used for privacy or to conserve power. 

 
 

Adjusting the Display 

The monitor has four function control buttons designed for comfortable viewing and listening. 
 

Function Description 

Icon 

Function 

Function Description 

 

Brightness 

The brightness of the display may be varied. 

 

Audio Volume 

The volume of the speakers and headphone may be varied. 
 

 

Содержание ND1750

















Отзывы: