Planar M40L, Руководство по установке

Страница: 83 / 112

Serial Port Status
m40L/m46L Installation Guide 73
Baud Rate
Must be the same as that used by the controlling computer. The baud rate is not
automatically set, as it is with modem communications. It must be manually set here
and at the computer to match each other.
Note: For firmware upgrades, you don’t need to adjust the baud rate.
Serial Port Status
To view RS232 port status, press
MONITOR
twice on the remote. You will see the status
of the serial port that has had the most recent activity. To view the status on a
different serial port, use the arrow key.
The
SERIAL PORT STATUS
menu provides diagnostic information for the serial port.
Controlling With RS232 Commands
The RS232 protocol - the “rules” for controlling displays with RS232 commands - are
described in a separate document. See "Accessing Planar’s Technical Support
Website" on page 89 to see how to get to the web page. Then look for m40L/m46L
and under that the
RS232 Guide .
S e r i a l P o r t Sta t u s
< E N T E R > t o c l e a r
C o m m a n d s R e c e i v e d 3 4
R e p l i e s S e n t 3 4
L a s t P a c k e t Ty p e O p e r a t i o n
L a s t P a c k e t A d d r e s s N o t A d d r e s s e d
B y t e s R e c e i v e d 9 2 1
B y t e s S e n t 7 7 3
U A R T F r a m i n g E r r o r s 4
U A R T O v e r f l o w E r r o r s 0
M o s t R e c e n t
. . . 11 5 , 111 , 1 0 8 , 11 7 , 1 0 5 , 111 , 11 0 , 6 3 , 1 3
. s t - - 1 ? . s t - - 2 ? . s t - - 3 ? . l c d . v e r t i c a l - r e s o l u t i o n ? .