Planar M40L, Руководство по установке

Страница: 39 / 112

Adjusting Levels for Video Sources
m40L/m46L Installation Guide 29
Adjusting Levels for Video Sources
Video sources are best adjusted if a color bar test pattern is available from the video
source: the DVD or VCR player. If you do not have access to a color bar test pattern,
you will have to adjust the picture by eye from the video source using the
INPUT
LEVELS
menu.
Note: When a video source is selected, Auto Setup Options are not available. Adjustments
must be made manually.
Adjusting the Picture With Color Bars
1 To access the
INPUT LEVELS
menu, press
LEVEL
on the remote.
Note: These controls are also used for analog sources when you select component video.
2 If possible, use a SMPTE color bar pattern from the video source you will use for
the program material.
3 In the
INPUT LEVELS
menu, check
BLUE ONLY
. You should only see the alternate
color bars, all of them blue.
4 Adjust
SATURATION
to make the outer two color bars match. Match them in
brightness; they will already match in color.
5 Adjust
HUE
to make the inner two color bars match.
6 Uncheck
BLUE ONLY
.
I n p u t L e v e l s
B r i g h t n e s s 1 4 0
C o n t r a s t 1 6 5
S a t u r a t i o n 1 5 0
H u e 1 2 8
B l u e O n l y