Planar M40L, Руководство по установке

Страница: 64 / 112

Color Balancing Multiple Displays
54 m40L/m46L Installation Guide
2 On each display, open the
BACKLIGHT CONTROL
menu (
MENU
>
ADVANCED
OPTIONS
>
BACKLIGHT SETTINGS
).
a Set
BACKLIGHT CONTROL MODE
to
MANUAL
.
b Set (or confirm)
BACKLIGHT INTENSITY
to 10 (100%).
3 On each display, open the
COLOR BALANCE
menu.
4 If the array has never been color balanced, make sure you start with the
NATIVE
color temperature setting on each display. If you are not interested in achieving a
specific color temperature, use
NATIVE
, which is the brightest. If the display has
been color balanced before, it will display
CUSTOM
in the
COLOR TEMPERATURE
line, because the balance values don’t match any of the pre-set color
temperatures.
5 On each display, highlight
TEST PATTERN
and use the left or right arrows until the
menu displays
WHITE
.
Note: Always use the internal Test Patterns for color balancing, not an external pattern.
6 When all displays are white, find the least bright display in the array. This will be
the “baseline” display, and you will not adjust it. All other displays will be adjusted
to this baseline display.
Why pick the “least bright” display? Why not pick the brightest and adjust to it?
When the white value is 100, the display is as bright as it can get. You are
adjusting for slight variations in backlight brightness.
B a c k l i g h t C o n t r o l
A u t o B a c k l i g h t o n
Tu r n B a c k l i g h t o f f w i t h n o S o u r c e ( D P M S )
D P M S D e l a y 1 h r
B a c k l i g h t C o n t r o l M o d e A u t o
B a c k l i g h t I n t e n s i t y 1 0
A m b i e n t T h r e s h o l d 9 9 L u x
A m b i e n t L i g h t 2 3 9 L u x
B a c k l i g h t C o n t r o l
A u t o B a c k l i g h t o n
Tu r n B a c k l i g h t o f f w i t h n o S o u r c e ( D P M S )
D P M S D e l a y 1 h r
B a c k l i g h t C o n t r o l M o d e M a n u a l
B a c k l i g h t I n t e n s i t y 1 0