Instruction Manual
DM08
3 Safety instructions
Before you install the DM08 read through this operating manual carefully. If the instructions con-
tained within it are not followed, in particular the safety guidelines, this could result in danger for
people, the environment, and the device and the system it is connected to.
The DM08 corresponds to the state-of-the-art technology. This concerns the accuracy, the operat-
ing mode and the safe operation of the device.
In order to guarantee that the device operates safely, the operator must act competently and be
conscious of safety issues.
PKP provides support for the use of its products either personally or via relevant literature. The
customer verifies that our product is fit for purpose based on our technical information. The cus-
tomer performs customer- and application-specific tests to ensure that the product is suitable for
the intended use. With this verification all hazards and risks are transferred to our customers; our
warranty is not valid.
Qualified personnel:
The personnel who are charged for the installation, operation and maintenance of the DM08
must hold a relevant qualification. This can be based on training or relevant tuition.
The personnel must be aware of this operating manual and have access to it at all times.
The electrical connection should only be carried out by a fully qualified electrician.
General safety instructions:
In all work, the existing national regulations for accident prevention and safety in the workplace
must be complied with. Any internal regulations of the operator must also be complied with,
even if these are not mentioned in this manual.
Degree of protection according to EN 60529:
Ensure that the ambient conditions at the site of use does not exceed (comply with) the require-
ments for the stated protection rating (§ Characteristics of the DM08 "Characteristics of the
DM08").
Take appropriate measures to ensure that the medium does not freeze.
Only use the DM08 if it is in perfect condition. Damaged or faulty devices must be checked
without delay and, if necessary, replaced.
When fitting, connecting and removing the DM08 use only suitable, appropriate tools.
Do not remove or obliterate type plates or other markings on the device, as otherwise the war-
ranty is rendered null and void.
Technical changes reserved
-
7
-
