5
3
✤
The figure above is an example only. Modifications are possible.
Internal side of the door of the freezer
7
Light / Lamp cover (depending on model)
4.2 Before initial operation
NOTICE! Leave the appliance in an upright position for 4-6 hours before you
connect it to the mains to ensure, that the oil has flowed back into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has been
disconnected from the mains for a longer period of time, allow the appliance to cool
down for 3 until 4 hours (s. chapter 4.5 SETTING OF THE TEMPERATURE)
before you place any fresh or frozen food in the appliance. If you place food in the
appliance before it has reached its normal operating temperature, this foods can thaw
and / or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter CLEANING AND MAINTENANCE).
3. Do not start the appliance immediately after installation. Wait 4-6 hours to ensure
proper operation.
4. Connect the appliance to the mains properly.
5. The noise generated by the compressor and the gases / liquids of the appliance is normal.