4
with a damp cloth using lukewarm water and a mild detergent (see also chapter
CLEANING AND MAINTENANCE). Never remove any components of the back of
the appliance!
4. Install the appliance in a suitable position with an adequate distance from sources of
heat and cold.
5. Check that the appliance and the power cord are not damaged.
6. Install the appliance in a dry and well-ventilated place.
7. Protect the appliance from direct sunlight.
8. The doors must open completely and without hindrance.
9. Install the appliance on a level, dry and solid floor. Check the correct installation with a
bubble level.
10.Connect the appliance to the mains properly.
11.The rating plate is inside the appliance or at the back.
3.1 Space and ventilation requirements
Observe the required minimum distances for proper ventilation.
All dimensions in this chapter are given in centimetres.
The figures shown in the following chapters (3.1.1 / 3.1.2) are examples only.
Modifications are possible.
3.1.1 Space requirement
Dimensions of the appliance (W = Width / D = Depth)
View from above:
D
Height
72,00 cm
83,50 cm
W
91,00 cm (GT 200A+++)
107,40 cm(GT 250A+++)
124,00 cm(GT 300A+++)
