44
Water inlet / drainage installation
1.
The water inlet and drainage installation must be carried out by a qualified
professional.
2.
Use brand-new hoses and connector kids only.
3.
We recommend to secure the water supply with a back pressure valve.
Water inlet hose installation
Permissible water pressure
Min. permissible pressure: 0,2 bar.
If the water pressure is lower than 1
bar, please contact your aftersales
service.
Max. permissible pressure: 0,98 Mpa.
Use a screw-on hose connector to connect the water inlet hose to a water tap with
a 3/4 inch external thread. Check that the connection does not leak. If the water
pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear and free of impurities.
Water outlet hose installation
Fit the drainage hose of your
appliance to the drainage
pipe without bending.
If the length of the hose is
not sufficient, apply to your
authorized service for an
extension made from the
same material as the original
hose. Remember that the
length of the hose (including
extension)
should
not
exceed 4 meters.
If the drainage hose is longer the 4 m. the dishes will not be cleaned properly .
Check that the connection does not leak. Fix the outlet hose with a hose-holder.